Leveldek.com
  • HOME
  • ABOUT
  • TECHNICAL
  • FLOOR FINISHES
  • CASE STUDY
  • INSTALLATION
  • DOWNLOADS
  • CONTACT US

A new level in raised floor underfloor heating systems


High end residential has now become the norm across all areas of the construction industry, therefore making it apparent that architects and contractors are looking for ever more cost-effective solutions. LevelDek is designed to cater to this market, by providing a high-end finish with a low-cost , simple levelling alternative.

LevelDek has been developed by NEW ERA flooring and Jupiter Heating Systems Ltd who between them have years of floor construction and heating knowledge. The aim of this collaboration was to combine the industry standard raised floor system with the best underfloor heating solution.

Picture
The key aim during the development of the LevelDek system was to ensure that the heating elements were positioned directly underneath the floor finish unlike other systems that simply rest the pipework on the floor. Further explanation of this can be found on the technical page.

Uneven floors up to 431mm can be levelled by combining base blocks, cradles and packers to achieve accurate heights with ease. Base blocks can be supplied with either foam pads for improved acoustic properties or rubber floor pads for gym and sports floors.

Picture
System construction heights range from 74mm to 431mm.

The design comes from years of experience


Jupiter Heating Systems has been designing and manufacturing underfloor heating systems for many years and New Era has become the industry standard in cradle and batten raised floor systems. Both Jupiter Heating Systems and New Era had recognised the need for improving the existing solutions on the market.

The design of LevelDek is simple. It comprises of heating elements supported by saddles which in turn sit on raised, level battens. This automatically positions the heating elements where they should be, directly underneath the floor finish. With the heating elements now correctly positioned heat outputs can be accurately calculated, flow temperatures can be reduced and energy costs brought down. The raised heating elements provide welcome space for additional M&E services to be accomodated within the LevelDek system.

Picture
​The LevelDek saddle is a patented fully recycled polypropylene product.
Picture
Simplicity itself; the heating elements consists of only three panels, each made of reinforced expanded polystyrene with integrated 0.5mm aluminium diffuser plates. These panels accept a 16mm, PE/RT, 100% air tight pipe.

With the concept of LevelDek now explained, further detailed information and how it compares with alternative systems can be found on the technical page.
Technical

The LEVELDEK system is a collaboration between 

Picture
Picture

OUR Hours

M-F: 9am - 5pm

CALL US

01276 859 066

Email US

info@jupiterunderfloorheating.com
Jupiter Heating Systems Ltd. 2018 | Unit 1, The Barns, Pennypot Lane, Chobham, Woking, Surrey, United Kingdom, GU24 8DJ

Company No. 05273967 | VAT No. GB 849 3471 91 | Registered in the United Kingdom | Privacy Policy
GET SOCIAL WITH US
  • HOME
  • ABOUT
  • TECHNICAL
  • FLOOR FINISHES
  • CASE STUDY
  • INSTALLATION
  • DOWNLOADS
  • CONTACT US